Most Important Frequently Asked Catia V5 Interview Questions
Interview Quesions on Catia V5
-
Answer :
Computer Aided Three Dimensional Interactive Application.
-
Question 2. What Is The Save Extension Of Sketcher File?
Answer :
CAT Part
Mechanical Interview Questions -
Question 3. Does Catl4v5 Work On Unix Platform?
Answer :
Yes
-
Question 4. Is It Possible To Increase The Size Of Plane Boundary Representation & How?
Answer :
Yes, go for Tools-Options- Infrastructure-Part structure-Display.
-
Question 5. Is It Possible To Directly Enter In To Sketcher Workbench?
Answer :
No, it is not possible to enter in to sketcher workbench directly. We have to go for any workbench &form there we can enter the sketcher workbench..
AutoCAD Interview Questions -
Question 6. Which Is The Tool Used To Exit From Sketcher Workbench To Part Design Workbench?
Answer :
Exit Sketcher.
-
Question 7. What Is Use Of Construction Elements?
Answer :
Construction elements assist in sketching the required profile in sketcher.
Mechanical Engineering Interview Questions -
Question 8. What Are The Default Units Of Lmt (length. Mass And Time) ?
Answer :
mm, Kg, Second.
-
Question 9. What Is Sketch Tools In Sketcher Workbench & Explain The Importance Of It?
Answer :
SKETCH TOOLS in sketcher workbench are the commands, which find very use in creating sketches. SKETCH TOOLS are namely geometric and dimensional constraints, construction elements/standard elements and Grid option. They play very important role in sketching, whenever we want to constrain a sketch we use these options and if we want to convert any element into a construction element once again these options come into picture.
CNC Programming Interview Questions -
Question 10. Is It Possible To Hide Specification Tree?
Answer :
Yes, with help of F3 button, but the option in Tools conunand must be checked to allow this.
-
Question 11. What Is Show/hide Option?
Answer :
Show mode enable us to see all the components presently opened and in Hide mode we can hide the desired elements from the view for time being.
Pro-E Interview Questions -
Question 12. That Is The Use Of Cut Part By Sketch Plane?
Answer :
This task shows how to make some edges visible. In other words, we are going to simplify the sketch plane by hiding the portion of the material that is not needed for sketching.
Mechanical Interview Questions -
Question 13. How Do You Measure Arc Length?
Answer :
We can measure arc length by using MEASURE ITEM command. Sometimes we need to customize the option for arc length if it is not checked earlier using customization in MEASURE ITEM command.
-
Question 14. What Is The Meaning Of True Dimension?
Answer :
True dimension is the dimension desired after the machining. In other words, this is the value that should be attained after the machining.
-
Question 15. What Do ‘you Mean By Iso-constraints?
Answer :
If all of the degrees of freedom of geometry have been takes up by a consistent combination of dimensions & fixed geometry,. That geometry is said to be ISO-CONSTRAINED. Geometry that still has some degrees of freedom is said to be UNDER constrained.
Solid Works Interview Questions -
Question 16. What Is The File Extension Of A Part File?
Answer :
File Extension of Part file is dot CATPart (.CATPart)
-
Question 17. Which Are The Neutral File Extensions We Caii Use For The Part File?
Answer :
IGES/igs, STEP fstp, STL, WRL, etc
CNC Interview Questions -
Answer :
Yes, ou can create a block using line, when you are extruding a line or any open profile you can check thick option in Pad feature (to avoid Error message). You can Give limit one, Limit Two and Thickness one and two. You will get Block from line and thin sheet from any open profile.
Note: Dont use this option to create a sheet metal part using part design.
AutoCAD Interview Questions -
Question 19. What Is The Meaning Of Mean Dimension?
Answer :
Mean dimension is the dimension that should be mern of all the dimensions, which are tolerance.
-
Answer :
Degree of freedom for points & ellipse is 2 for circles it is 3 & for ellipse it is 5 in two dimensions.
Unigraphics NX Interview Questions -
Question 21. What Is The Importance Of Sketch Tools?
Answer :
This tool bar only appears when you are in sketcher workbench. The four tools found in this tool bar are toggle tools. When tool is highlighted the tool is on. This particular tool bar changes depending on what other sketcher workbench tool is currently selected.
-
Answer :
No, we cannot enter directly into the part design.
-
Question 23. What Is The Kernel Of Catia?
Answer :
CNEXT
CATIA Interview Questions -
Answer :
The kernel is the basic indispensable part of an operating system that allocates resources such as low- level hardware interfaces & security.
Mechanical Engineering Interview Questions -
Question 25. What Do Catia Pi, Catia P2 And Catia P3 Mean?
Answer :
Pi, P2 and P3 will indicate the different types of platforms of CATIA. Higher the number sophisticated will be the software.
-
Question 26. What Are The Different Options Available In Quick Trim Command?
Answer :
- BREAK & RUBBER in removes part of the element, which is clicked.
- BREAK & RUBBER out removes part of the element, which is not clicked.
- BREAK & KEEP keeps both parts of elements after breaking.
-
Question 27. Can We Select Non-planar Surface As Sketch Plane?
Answer :
No, we cannot select a non-planar surface as sketch.
CNC Programming Interview Questions -
Question 28. What Is The Use Of Isolate In Sketcher Workbench?
Answer :
Isolated is used when 3D geometry is projected on to a sketch in order to be modified and used as part of the sketch’s profile.
-
Question 29. If I Donor Want The Relation B/w Original And Mirrored Elements What Should I Do?
Answer :
Explore and the relation b/w the original and mirror element doesnt exit.
-
Question 30. How Do We Change, Sketch’s Reference Plane?
Answer :
Right click on the sketch whose reference plane is to be changed and select the change reference plane and then select new reference.
-
Question 31. How Many Axis Can Be Created In A Single Sketch?
Answer :
Only one axis can be created in a sketch, if more than one axis are drawn then only one of them, the latest one, will be axis and others will be converted into reference elements.
-
Question 32. Can Axis Be Converted Into Line Or Vice Versa?
Answer :
We can convert line into axis but axis cannot convert into line.
-
Question 33. Can We Redefine The Sketches?
Answer :
Yes.
Pro-E Interview Questions -
Question 34. What Is Use Of Sketch Analysis?
Answer :
To check whether the sketch is fully closed or not so that the sketch can be used or not so that the sketch can be used for further operations in part design.
-
Question 35. Where Do We Use Axis?
Answer :
Axis is used in creating shaft (revolved) feature.
-
Question 36. What Is Rho Value For Ellipse, Parabola And Hyperbola?
Answer :
Parabola has RHO values of 0.5, Ellipse has RHO value between 0 & 0.5 and Hyperbola has RHO value b/w 0.5 & 1.0.
Solid Works Interview Questions -
Question 37. How Many Dimensions Are Required To Constrain The Ellipse?
Answer :
Three dimensions are required namely major axis, minor axis and the distance from the origin.
-
Question 38. Mention The Color Code Of Iso-constrained, Insider, And Over Con Strained Elements?
Answer :
The color code for these elements is Green. White and Magenta respectively.
-
Question 39. How Do You Create A Negative Polarity Body In Part Design?
Answer :
After inserting a new body If you use Negative feature as fist feature in a body the polarity of the body will be negative. Negative features like Pocket, Groove, Slot Hole etc.
-
Question 40. What Is The Alternate Option For Intersect Boolean Option?
Answer :
Solid Combine is alternative option for Intersection Boolean operation.
CNC Interview Questions
Topic: Catia V5 Interview Questions
Interview Quesions on Catia V5
No comments:
Post a Comment